Kerbs are less of an obstacle with loopwheels. Loopwheels reduce jolting, soften the impact of landing, and so can help manage pain. Over 95% of the customers rate Loopwheels as high or very high quality Over 85% of the users felt positive about Loopwheels after using them for 2 weeks Over 80% of our customers said they’d chosen Loopwheels to reduce the amount of vibration they experienced in their wheelchair
Traditional wheelchair spokes have been replaced with a design that integrates suspension for smoother passage over uneven surfaces.
.
When driven wheels are independently suspended, the differential is fixed to the frame and drives the wheels by jointed drive shafts.
For over 60 years, Pemco has developed shopping cart and multi-purpose casters focused on providing the greatest value at the most competitive prices. Designed and proven in environments ranging from retail to industrial, Pemco's casters and wheels have been a longtime choice for OEM and service companies around the world.
On the plus side, it's a really nice looking bike... very frustrated with it though....
“First of all, it is symmetric to absorb shock in any direction," Rozanes told From the Grapevine. "Second, selective suspension means if you drive normally on flat surfaces, there’s no suspension unless encountering an obstacle."
Curve Grip
Carry Wheels
Power Wheels With Suspension
Urban Wheel
Wheelchair Wheels Replacement
Wheelchair Push Rim Tape
GRAND RAPIDS, Mich. — New for 2021, TerraTrike’s Rogue creates a whole new level of comfort and ease in cycling, a complete departure from the world of finicky, clunky shifting. The Rogue’s internally geared Enviolo hub offers an infinite range of seamless shifting – from a standstill or under load – without the noise of idler pulleys or the constant tuning of derailleurs.
Copyright 2021 • SouthwestMedical.com • All rights reserved • SouthwestMedical.com, LLC Home Info _About Me _Contact Blogs _Travel _Accommodation _Days Out _Theatre _Products This has definitely been a well requested blog. I was lucky enough to get to try the only pair of Loopwheel Urban's in the world at the moment before their release later this year. I certainly put them through their paces, taking them out in the city and off-road on sand, so, I wanted to share my thoughts with you! A Loopwheel is a wheel with integral suspension, designed to reduce vibration, increase performance and provide greater comfort. Giving you a smoother ride, they are more comfortable than standard wheels: the carbon springs absorb tiring vibration, as well as bumps and shocks. They’re designed for everyday use and are strong and durable. Loopwheels are not just a wheel, they’re a suspension system. Studies have shown that wheelchair users are exposed to levels of vibration that are considered unsafe and that this can affect health and life quality. This is a risk factor for all wheelchair users, increasing the amount of muscle fatigue and potentially damaging connecting nerves. For me, vibration causes a huge increase in pain which is why I was first interested in the product. Loopwheels solved this problem by using carbon composites to create an ‘in-wheel‘ spring that can absorb vibration, without the weight penalties of a suspension chair or the cost penalties of a full carbon frame. The Loopwheels reduce vibration by 68% at 7Hz, 52% at 10Hz and 76% at 13Hz. Overall Loopwheels significantly reduce the amount of harmful whole body vibrations a wheelchair user will experience, this is turn reduces pain and fatigue and therefore allows a wheelchair user to travel further. I signed up for the 'Try Before You Buy' Scheme for the classic Loopwheels. For £20, this allows you to have the loopwheels for 21 days. This fantastic scheme enables people to see whether the product would be right for them. My loopwheels were black and fitted with ease to my manual wheelchair. I was travelling a lot when I first got my loopwheels and I found them easy to store in the car or on the plane. You can get a specially made bag to put them in if you travel a lot which I like! One thing which a number of people contacted me about is the weight of the Loopwheels. They are 1.8kg without the push rim/tyre/axle. Looking at a leading competitor, X-Core, their wheels are 1.5kg without tyres. They aren't as lightweight as I would have liked and for me, I need to take the wheels off individually and use 2 hands to lift one (I am a weakling though!). You would have to make a decision about whether you could manage the weight of the wheels independently and also if you're willing to have that extra bit of weight in return for extra comfort; it's completely individual. Short and sweet, I love the look of the classic. Wherever I go, people ask about them and I always used them for my photoshoots. Having a 'pretty' chair gives me such a confidence boost so having wheels which reflect this is so special. I have very small front castors which absorb a lot of vibration on my wheelchair. Even with the Loopwheels on, my castors at the front were still an issue. For you to get the best out of this equipment, I would thoroughly recommend using it with something like a Tri-Ride or Freewheel. This elevates the small castors and allows the weight to go through the loopwheels, giving you the best possible result. I used them a lot in the dance studios and loved the glide on the solid floor. But, because I didn't have any add-on equipment to try, I don't feel like I felt the full potential of the Loopwheels outdoors, but I still felt a difference. At £872, with payment plans available, they are certainly an investment. Other wheelchair wheels on the market cost around £250 mark, so you are looking at an extra £600. With the new personal budget for wheelchairs just released, there could be some hope that equipment like this could be provided as 'top ups' if a good enough case was made, but in the meantime, you might have to save your pennies. Have one set of wheels for all occasions – from the streets to the park to the forest. Lighter; an everyday wheel that is light enough to lift easily with one hand. Deliver all-important comfort and pain relief whilst being efficient to push and roll. Wheels that look great, and look technical – and perform brilliantly. Different spring ratings dependant on speed and weight. At 1.36 they are lighter than one of their leading competitors, X-Core, who's wheels are 1.5kg without tyres. They were much easier to lift, meaning putting them in the car and attaching them to the chair was simple. I felt a significant difference from my 'classics'. Because they were so much lighter, I could self-propel for a significantly longer time which was fantastic. I also tried the wheels out on the sand whilst I was on holiday, and despite having no add on for my front wheels, they managed really well! The wheels are designed to tackle a multitude of surfaces and they certainly excelled in that. I also like the fact there are 3 different spring ratings. Because I'm so light, I didn't feel like I was getting the full spring potential in the classic sometime but on these I can opt for the soft so I can feel more benefit. All those positive reviews do come at a price and that is £1,800. It's difficult when equipment that could potentially benefit your quality of life is so out of your price range, honestly I know, but I also have got to know the company well now and know how much they've invested so this is priced for the quality of the product. I love Loopwheels because they genuinely want to help people live better. The brand is good, the people are good and the products are good. Personally, the Loopwheel Classics didn't have as much benefit to me as I'd hoped because I didn't have a piece of equipment to lift my front castors off the ground. If you want the full potential of them, as I've said before, I'd recommend giving them a go with a Tri-Ride, Freewheel or investing in some suspension front castors. However, the Urban for me was a game changer. I really felt the benefit from these wheels, especially with them being lighter and cannot wait for their official launch so I can get my hands on them! If you'd like to learn more about Loopwheels, try or order some, visit their website https://www.loopwheels.com I am an ambassador for Loopwheels, because of my love for the product, so the wheels discussed in these reviews were either #Gifted or PR trial. But, I certainly am honest with my review of them!
Rigid sandwich casters Material: PP wheel bonded to elastic rubber Size:100mm x 32mm ; 125mm x 35mm Load:110kg,150kg Bearing: Roller Bearing Purpose:Shock resistant casters,Shock proof casters,Industry caster wheels,trolley casters
2: forward- in a plane terrain riding, if your moving forward. (with the 1st case scenario considered) i think its good to.
By Michael Vega, Globe Staff LOUDON, N.H. --- Dale Earnhardt Jr., like most of his NASCAR brethren, was surprised to learn Tuesday that Juan Pablo... More on Boston.com Cars Reviews The Car Doctor Videos Photo galleries New Car Deals Used car deals Home| Today's Globe| News| Business| Sports| Lifestyle| A&E| Things to Do| Travel| Cars| Jobs| Real Estate| Local Search Contact Boston.com | Help| Advertise| Work here| Privacy Policy| Your Ad Choices| Terms of Service| Newsletters| Mobile| RSS feeds| Sitemap Contact The Boston Globe| Subscribe| Manage your subscription| Advertise| Boston Globe Insiders| The Boston Globe Gallery| © Boston Globe Media Partners, LLC
Once the 20inch wheel is in production, there are plans for a larger version for mountain bikes and even the possibility of a car version in the future.
So how does it work? Well, a suspension fork (spoke suspension) only works on one plane. The Loopwheels on the other hand, provide what Loopwheels call, “tangential suspension.” Basically, they work in every direction, according to Loopwheels.com. So, they respond “to a force hit head-on in the same way as they do to a force from above or below.” This gives riders a smooth ride, instead of the lumpy, vibrating ride they are used to.
Our website requires JavaScript to be enabled to work properly. Please enable JavaScript.
A set of ASW wheels, on the other hand, will cost you more upfront but last something like 13 times longer – out to the service life of the truck itself. Your first set of six wheels in this case will run you about $1.705 million, but over 10 years you'll likely only need two tread replacements at around $55,000 a pop, giving you a 10-year budget of $1.815 million and a $845,000 saving.
In the 20 minutes I was riding them, I had a blast. It really was as simple as that, they where a real hoot to ride.
Chief customer and supplier friend. Organised. Helpful. Always cheerful - even on a bad day. Small Team. Big Vision. Loopwheels are designed and made in the UK. Loopwheels Carbon Wheels Overview In Action Specifications Reviews Home / Loopwheels Wheelchair Wheels / Loopwheels Carbon Wheels Loopwheels Carbon Wheels Choose the perfect wheels for you... Rim size: Choose an option24 inch25 inch Push Rim Offset: Choose an optionnarrow (11mm)wide (19mm) Push Rim Type: Choose an optionCurve Grip (+£380)Curve Large (+£300)Gekko (+£380)Standard Black Aluminium Tyres: Choose an optionNo TyresSchwalbe Tyres with Schrader Car Valve (+£90)Clear
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement. While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement. Search by specifying the lower class category Casters Caster Related Components Days to Ship All 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less Related Categories to Casters MISUMI Home Automation Components Casters, Leveling Mounts, Posts Casters Wheels Leveling Mounts, Rubber Feet Angle Brackets Leveling Mounts Casters Caster Related Components Credit Card Bank Transfer About MISUMI Company Profile Code of Conduct IR Library MISUMI Group Inc. Career RoHS Information About this Website Terms and Conditions Cancellation Policy Privacy Policy Sitemap Useful Tools CAD Data Download Technical Data inCAD Library Customer Service New User Need to Quote/Order?
#5 Best Selling product in Diecast & Toy Vehicle TracksHot Wheels Launcher Loop Builder Track Set 3 Pcs 72 inch Moreracing
At first glance, most of us think: wow, this trike is big! And it’s heavy! Trust me: it’s not *that* big, nor heavy. Sure, it’s not tiny nor very light, but first impressions can be deceiving. It’s the three 24″ wheels that give it that look. Once you actually stand next to it, then sit on it, and especially if you have other trikes nearby, you’ll find that it’s not really so very different in overall dimensions than most other trikes. Before I go further, let’s put the numbers up that so many are wanting to see, then we’ll talk about what this all may mean to you. Le pillole per erezione Les traitements des problèmes d'érection Welche ist die beste Erektionspille? We’re offering you any two free CBD samples on this page.
These air shocks are tuneable to give you whatever level of tire deflection you choose, from super-firm to softer and squishier than a regular deflated tire can handle. Likewise, you can design in whatever degree of lateral flex suits your application, and even whatever level of torque flex you'd like, which allows the wheel to flex a little on the axle before it turns. This allows it to act as a soft torque coupler and gives a touch more traction in very difficult circumstances before the wheel spins, as well as slightly isolating the drive train from damaging torque forces in the rough stuff.
© Copyright 2015. Website brought to you by the friendly team at Cerberon Solutions.
I bought these for my two year old grandson who loves everything cars. I’m sure he’ll love them.
!
We’d like to set additional cookies to understand how you use GOV.UK, remember your settings and improve government services.
Spring loaded casters with brake Wheel Material:Iron core,PU wheels Size:5" x 50mm ; 6" x 50mm ; 8” x 50mm Loading Capacity:280kg ~ 350kg Bearing Type:Dual Ball Bearing
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more. Punches & Dies Guide Components Components/Peripheral Components Springs Checking fixture components
As far as treads go, the sky's the limit. Treads bolt directly onto the outer rim piece by piece, and there are a bunch of options to choose from, including a range of pre-molded road retread options by companies such as Michelin that bolt on in sections, or a plethora of heavy-duty industrial options that use polyurethane, urethane or steel pieces in a range of different configurations for serious off-road grab.
"Loopwheels turn a painful journey into a smooth one will recommend to all my wheelchair friends...."
Looking good fellow Sandy Eggan! haha. Wish they came in other colors like a gunmetal/anthracite. Joined Jan 14, 2018 Messages 15 Reaction score 10 Location Sactown Car(s) CivicX
You’ll notice your loopwheel has more movement, vertically and laterally. As soon as the springs are loaded, they compress and further change their concentricity. This is what gives you wheelchair comfort and shock absorption. A Loopwheel is designed to absorb shocks, reduce jolting and cushion your body against vibration. You’ll notice more sideways movement than with a spoked wheel, but you’re trading rigidity for greater comfort. Urban Wheel
Winter is always a time of year where my symptoms flare and I think a lot of it is due to the cold weather. Winter, for me, is a happy time ...
You will find the serial no. on a label at the lower cross bar. It writes xxx-xxxxxx.
The Colson Group is the largest manufacturer of caster and wheel products in the world. The company has operations in 14 countries and consists of nine major global operating units. Colson Group USA is the largest operating unit of the Colson Group, and it includes some of the most renowned brands of casters and wheels in the world: Colson, Albion, Shepherd, Jarvis, MedCaster, Pemco, Faultless and Bassick. These brands have been technological leaders in caster advances for more than 350 combined years. The drive and experience of Colson Group innovators have led to some of the most trusted, highest quality and advanced mobility solutions in today’s world.
That was a fantastic read. Thanks for sharing, I have already made a list of things I want to do with my car, granted not an interior list nor a 100% complete list, but as far as budget and small things (considering its just gonna be a mild modded DD) as the thread you linked calls it but I still got something out of it. Thanks again. Eventually i'm going to do a B-Swap but suspension work is a no brainer to get out of the way, atleast in my opinion OK..........so why are you asking us what should you do first if its a no brainer to you? Civics of your vintage need to be lowered about 2.5-3" with stock sized tires before you remove all wheel gap. This is too low for stock length shocks. A good riding spring lowers the car about 1-2" maximum. Some suggestions would be eibach pro kits, h&r sports, or Tein S techs with koni STRT shocks. They'll work fine with 15x7 +40 or so. I'd use 205/50/15's. But you can also use the stock 195/55/15. If you buy the wheels/tires first, the car will look funny until you lower it.
wordpress plugins and themes automotive,business,crime,health,life,politics,science,technology,travel Laidback Bike Report, August 1, 2021 Posted on July 31, 2021 by Larry Varney Greenspeed’s Aero is one of the fastest trikes on the road. They also make the more sedate but ever so utilitarian Magnum. What if we raced these two trikes across Michigan and evened the odds by adding a Bosch motor to the Magnum? Meet Wizwheelz executives Marshall and Mark who conducted such a contest this month and hear their exciting stories of this adventure.
At first glance, most of us think: wow, this trike is big! And it’s heavy! Trust me: it’s not *that* big, nor heavy. Sure, it’s not tiny nor very light, but first impressions can be deceiving. It’s the three 24″ wheels that give it that look. Once you actually stand next to it, then sit on it, and especially if you have other trikes nearby, you’ll find that it’s not really so very different in overall dimensions than most other trikes. Before I go further, let’s put the numbers up that so many are wanting to see, then we’ll talk about what this all may mean to you. Le pillole per erezione Les traitements des problèmes d'érection Welche ist die beste Erektionspille? We’re offering you any two free CBD samples on this page.
NOTE: Catrike lead time is now 27 weeks. You must order, with 50% down payment, any Catrike model you want by March 15 in order to have one by early Fall 2021. No order, no Catrike in 2021. We don’t like this one bit but we have no choice – 7 month back order time will put us out of business unless we have co-commitment for each Catrike ordered. Latest Developments in the Velomobile World Posted on February 3, 2021 by Larry Varney
The Loopwheel works using three heavy duty springs instead of spokes. When the rider hits a bump, the springs compress to give a smooth ride
Reinventing the wheel: The Loopwheels use large springs instead of spokes to give the bike wheels built in suspension
Our company is operated by industry professionals with more than 35 years of direct experience in providing customers with all types of specialty wheelchairs. We have grown from typical wheelchair accessory equipment, to a full line of wheelchairs made by Quickie.
they sent me another one with out having to return the first one and the tire on the second one is also bent. now I am waiting for a refund while I have 2 broken bikes. I am a police officer and bought this bike to train and exercise for bike patrol. Used the bike for the first time yesterday and it broke a few hours into training with maybe 6 miles on it. Front fork seals were in poor condition and leaked fluid right from the start. Front brake cable came loose during some braking drills. Finally the back gear system snapped and locked up the back tire almost causing me to crash. I know the is not a $2,000 or $3,000 dollar bike, but for almost $500, it should be a much better built bike then it was. Very disappointing. When I picked up the package, I was impressed at the condition of the box. There were no smashed corners or gashes. Upon opening the box, I was happy to see such efficient packing, padding and securing of items so nothing rubbed together. The bike arrived with no scratch whatsoever on it!
A heads up to politicians and city planners: stop wasting your money on bike lanes, tax incentives, and PSA campaigns. All you need do to persuade your constituents to trade in cars for bicycles on their morning commute...
NOTE: Catrike lead time is now 27 weeks. You must order, with 50% down payment, any Catrike model you want by March 15 in order to have one by early Fall 2021. No order, no Catrike in 2021. We don’t like this one bit but we have no choice – 7 month back order time will put us out of business unless we have co-commitment for each Catrike ordered. Latest Developments in the Velomobile World Posted on February 3, 2021 by Larry Varney
I find it difficult to credit the coach moving down the hill with 20,000 - 40,000 lbs of motorhome pressing the jack pads into the earth. That assumes the jacks are rated for the full coach weight and don't break under the load. My 36,000 lb coach had 4 x 16,000 lb jacks, so I wasn't too worried. Back in the day some coaches had poor frame rigidity, especially up front, so the front cap and windshield frame would often twist if the front wheels came off the ground. My '96 Southwind (F53 chassis) was like that and I avoided ever lifting the front to even barely touching cause the windshield would start to move. My 2002 W22 chassis coach didn't seem to have any problem with that but I was still careful. My 2004 DP was stable as a mountain no matter how much it was jacked. Spent many a summer at my brothers home in SW PA with wheels off the ground. He lives on a hill side and the 2012 Tour never had a problem.
This site requires JavaScript to be enabled and will not function properly without it.
[Hot Item] Spring loaded casters with brake, SA63SPB-5''/6''/8'', Caster Wheels, China, Factory, Suppliers, Manufacturers
Hollow kingpin sandwich caster Material: PP wheel bonded to elastic rubber Size:100mm x 32mm ; 125mm x 35mm Load:110kg,150kg Bearing: Roller Bearing Purpose:Shock resistant casters,Shock proof casters,Industry caster wheels,trolley casters
The latest idea to come across our desks, though, makes a compelling business case for itself as well as offering some interesting dynamic capabilities. Meet the Air Suspension Wheel (ASW), from Global Air Cylinder Wheels out of Chandler, Arizona.
Civics of your vintage need to be lowered about 2.5-3" with stock sized tires before you remove all wheel gap. This is too low for stock length shocks. Suspension, but don't just slap on some lowering springs on stock stocks; invest the money and get both. Better to do both then put on lowering springs then have to break down the assembly two months later to replace the spent stock shocks. Save yourself some labor. yea true. its been answered.. IDK even know where I would move it to. So its closed 18" TE 37 wheel hop/, smaller wheels w/ bigger tires? heavier wheels? Suspension? Featured How-Tos Honda Civic: Body Modifications Why is My Dashboard Cracking? How to Paint Interior Why is My Engine Hesitating? Honda Accord: Fuse Box Diagram All How-Tos » Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information - Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information - Top View First Unread Thread Tools Search this Thread Log in | Register S2KI Honda S2000 Forums > General Interest > The S2000 Gallery The S2000 Gallery Cornucopia of sight and sound! Show your friends your S2000 photos, S2000 images, S2000 photochops and S2000 videos. so i've searched and searched but most threads are old so the pics dont work. my car is currently lowered and the rear is WAY too stiff so im thinking of going back to stock suspension and keeping my 17" wheels. ps. i've always driven lowered cars, dumped cars actually so i dont wanna hear the 4x4 comments or people bragging about how low they are. Here's my S2000. I am on stock suspension and have 18" Rota D2 wheels. I get a lot of compliments on it actually. yokes... suspension before wheels guys please for the love of the kittens I understand your opinion, but for some of us having a lowered ride height is not an option. My car is a daily driver...year round...through Michigan winters. Thus lowering makes my car less practical than normal. So the comment about "suspension before wheels" is unnecessary for me. I'd like to see how many guys that are lowered get through a Michigan winter like I do! I agree that the lowered ride height looks great, and if I had a second car or didn't need to drive through winter snow, I'd lower my car slightly as well. Drove my integra tucking tires thru MN winters when I was younger and I could only afford one car To be honest with the stock sized tires. My buddies stock s2k with stock ap2 wheels and tires doesn't look that bad at stock height. man my car is tucking and out here the roads are some of the worst around, stock height is not an excuse! No offense, but you live in Texas and your winters are nothing compared to Michigan. I don't mind my car at stock height; it works for me. Haters are always gonna hate... I'm sure you were brave enough to drive a slammed Integra through the winters but....did you want to? Did it handle great? Was clearance an issues? Let's be realistic guys... Not all of us can afford to lower our cars, or have second cars, or can deal with the impracticality. Different strokes for different folks. have you considered a small drop? maybe koni yellow or something Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information - Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information - Top Thank you for your quote request. A representative will get back to you shortly. For immediate assistance please call . Your Information: First Name* Last Name* Phone* Email* Select a Location* : E Whittier Blvd, La Habra, CA S Monte Vista St, La Habra, CA Salinas Tires & Wheels, Westminster CA N Hacienda Blvd, La Puente, CA Your Vehicle: Year Make Model Option — OR — Let us find your vehicle info for you: Get My Vehicle Info Comments * Required Field Suspension Repair in La Habra, CA Properly aligned steering and suspension can help deliver a smooth and controlled ride. Salinas Tires & Wheels offers quality affordable La Habra, CA auto repair services and La Habra, CA Suspension Repair. What they do: The steering system and suspension systems bear the weight of your vehicle, maintain the tires on the road while driving and assist in delivering a hassle-free, safer trip. Why service is necessary: The steering and suspension system must be checked at least once a year to prevent significant repairs. Anytime you feel symptoms of steering or suspension troubles have your mechanic check your car to correct the issue rapidly. Extended steering and suspension concerns will result in extreme safety dangers quickly. Indicators that you require your steering and suspension system examined consist of: Pulling to the side Troubles steering Complications driving over uneven roads or dips Vehicle continues to bounce after going over a bump Tires stray or shake Steering seems to be slipping To help ensure your steering and shocks are working appropriately, a technician may examine all of your steering and suspension parts, and will also evaluate: Power steering fluid Tightness of nuts and bolts Uneven tires or wear Unbalanced wheels Torn or used power steering belts Problems with alignment Impacts and/or Struts Steering Wheel Alignment Our technicians will also inspect your tires and tire balance to make sure the complications are not tire-related. We will take care of all of your steering necessities, call or stop in today for an estimation! Call Salinas Tires & Wheels soon to set up your next Suspension Repair and Wheel Alignment service. Salinas Tires & Wheels is proud to be your number one auto repair services in La Habra, CA and provider of La Habra, CA tires. Salinas Tires & Wheels proudly serves the local La Habra and Westminster, CA areas. We understand that getting your car fixed or buying new tires can be overwhelming. Let us help you choose from our large selection of tires. We feature tires that fit your needs and budget from top quality brands, such as Michelin®, BFGoodrich®, Uniroyal®, and more. We pride ourselves on being your number one choice for any auto repair. Let us earn your business. Home Tires Wheels Services Coupons About Us Contact Privacy Policy Terms of Use Sitemap Accessibility Powered by By clicking "Continue" or continuing to use our site, you acknowledge that you accept our Privacy Policy and Terms of Use. We also use cookies to provide you with the best possible experience on our website. You can find out more about the cookies we use and learn how to manage them here. Feel free to check out our policies anytime for more information. MY350Z.COM - Nissan 350Z and 370Z Forum Discussion > General > 2003-2009 Nissan 350Z > 350Z Roadster Before creating a new thread or contacting a moderator/administrator, please peruse the following threads first to see if it's already been addressed: My350Z.com Terms of Use (TOU) - || - Top 100 FAQs - || - Marketplace FAQs - || - Premier Membership I have searched through the modified Roadster picture thread, but I can't decipher which pics are wheels on stock suspension or if the car is lowered. Can the people with aftermarket rims and stock suspension please post pics of their ride. I want to see if aftermarket wheels would look weird on stock height. btw. I may be finalizing a deal on a ZR tomorrow...but I'm still undecided. These pics could sway me. Personally, I think it looks fine. The wheel gap left after putting 19's on my Z is even-spaced all around. Straight from the factory, the wheel gap on a Z is considerably less than most cars out there. Even compared to a handful of high-dollar supercars, the Z's gap is less. I've done the drop thing in the past, but I just can't justify it as much with the Z. Sure, it may look a little better dropped, but I don't think it looks bad at all with the factory ride height (with or without aftermarket wheels). damn that looks sweet! definitely dont need to lower anymore. I bought my wheels like almost two years ago, on the stock suspension, it made me wanna cry....look how horrible it looks, also it didnt help I bought the wrong size tires for the rear, a stretched 275/30, my 285/35's are the perfect size now, but even if I had them on stock suspension, its gross looking. these first two pics are without my Tein Stechs(the car looks like a damn truck its so high), the third is the same tires with the Teins, it looked alot better but the tire being the wrong size still bothered me, finally the last pics are Teins + 235/35 and 285/35 tires...its as close to perfect as I am going to get, any lower I would have to shave the fender wall and get some suspension, but I am happy where it sits. Last edited by atar350; 02-25-2007 at 11:01 AM. when i got my wheels i just rofl'd for awhile at the 4x4 look i had going. i had to do something about it so i got some hotchkis springs. mild drop, much better. It doesnt look bad at all, but the nice thing about the Teins and some other springs (not all, because some just slam the car to the ground) was it was less then an inchdrop and gave it a more aggressive stance, body roll really wasnt an issue on the Z stock, but with some good springs it feels even more solid, I'd recommend them to you. Beleive me it was bad without springs, here is a good pic of the horrid gap on stock suspension... Last edited by dutchboy350Z; 02-25-2007 at 11:25 AM. lol, 20's will help fill a tire well, your car looks good but is really high off the ground, your car would be baaaaaaad lowered some. The Z coupe does look like its riding high now that I took another look at it. So I am having a hard time deciding whether or not to trade in my car for the ZR. The whole impracticality of the car and having it as a daily driver even in winter is scaring me...someone help convince me... So I am having a hard time deciding whether or not to trade in my car for the ZR. The whole impracticality of the car and having it as a daily driver even in winter is scaring me...someone help convince me...
The Colson Group is the largest manufacturer of caster and wheel products in the world. The company has operations in 14 countries and consists of nine major global operating units. Colson Group USA is the largest operating unit of the Colson Group, and it includes some of the most renowned brands of casters and wheels in the world: Colson, Albion, Shepherd, Jarvis, MedCaster, Pemco, Faultless and Bassick. These brands have been technological leaders in caster advances for more than 350 combined years. The drive and experience of Colson Group innovators have led to some of the most trusted, highest quality and advanced mobility solutions in today’s world.
Folding design makes the scooter ideal for travel or storage.Built to handle the bumps our Kids scooter is guaranteed to last for years of enjoyment.
Shop with us Brands Specials Sale & clearance
Spring loaded swivel casters Wheel Material:PP core,PU wheels Size:Ø152 x 50mm ; Ø203 x 50mm Loading Capacity:260kg ~ 300kg Bearing Type: Double Ball Bearing
